1 | Short-Term Hydrostatic Pressure Test | Hydrostatic Pressure Tester | As per Client Requirement |
2 | Determination of Pipe Dimensions | Thickness Gauge/Vernier Caliper | |
3 | Longitudinal Heat Reversion Test | Oven | ISO-2505 |
4 | Methylene Chloride Test | Methylene Chloride Bath | PS-3051 |
5 | Specific Gravity Test | Density Meter | ASTM-D792 |
6 | Melt Flow Index of Polymers | Melt Flow Indexer | ASTM-D1238/ISO1133 |
7 | Material Identification (FTIR/ATR) | FTIR | ASTM-E1252 |
8 | UV Exposure of Plastics | UV Chamber | ASTM-G154 |
9 | UV Spectrophotometer Analysis | UV/VIS Spectrophotometer | |
10 | Mechanical Properties (Tensile/ Flexural/ Compression/Welding/Tear) | UTM (TIRA, Japan) | ASTM/ISO as per Material |
11 | Melting Point Test | Melting Point Apparatus | |
12 | Thermal Analysis by DSC | DSC | ASTM-E1356 |
13 | Hardness Test | Shore (A&D) Durometer | ASTM-D2240 |
14 | Impact Test for Films and Paints | Falling Weight Impact Tester | ASTM-D2444 |
15 | Volatile Content in Plastic | Oven | ASTM-D1203 |
16 | Moisture Test of Polymer Resin | Moisture Tester | ASTM-D6980 |
17 | Fiber Content of Polymer Composites | Muffle Furnace | ASTM- |
18 | Dynamic Mechanical Analysis | DMTA | ASTM- |
19 | Thermogravimetric Analysis of Polymers | TGA | ASTM-E2550 |
20 | Izod Impact Test | Izod Impact Tester | ASTM-D256 |
21 | Charpy Impact Test | Charpy Impact Tester | ASTM-D6110 |
22 | Heat Deflection Temperature (HDT) | HDT Apparatus | ASTM-D648 |
23 | Vicat Softening Point | Vicat Apparatus | ASTM-D1525 |
24 | Cure properties of Rubber Compounds using MDR | Moving Die Rheometer | ASTM-D5289 |
25 | Akron Abrasion Testing of Rubber | Abrasion Tester | ASTM-D5963 |
26 | PP/PE Sacks UV Degradation Test | UV Radiation Chamber | ASTM-G154 |
27 | PP Sacks UV Degradation and Virginity Test (for food Deptt. only) | UV Radiation Chamber/FTIR | ASTM-G154, ASTM-E1252 |
28 | Compression Set of Rubbers | Compression Set Assembly, Oven | ASTM-D395 |
29 | Flammability Test | Burner | UL94 |
30 | Water Absorption Test | Glassware | ASTM-D590, ASTM-C272 |
31 | Dimensional Stability Test | Oven | ASTM-D1204 |
32 | Oil Resistance for Rubbers | Specific Oil, Oven | ASTM-D573 |
33 | Determination of Weight/Unit Area | GSM Cutter + Weight Balance | |
34 | Virginity Test | FTIR | |
35 | Measurement of Warp, Weft & Denier | Vernier Caliper + Weight Balance | |
36 | Physical Characteristics | Physical Observation | |
37 | Cone Test | | |
38 | Ash Contents/% of filler | Muffle Furnace | ASTM-D2584 |
39 | Gloss Test | Gloss Meter | ASTM D-523 |
40 | Volatile Content Test | Oven | ASTM D-2369 |
41 | Touch, Drying Time | | ASTM D-1640 |
42 | Over Coating Time | | ASTM D-1640 |
43 | Density Test | Pyknometer | ASTM D-1475 |
44 | Viscosity Test | Rheometer | ASTM D-7867 |
45 | Viscosity Test | Ford Cup | ASTM D-1200 |
46 | Adhesion Test | Adhesion Kit | ASTM D-3359 |
47 | Water Resistance for Paints | Glassware | ASTM D-870 |
48 | Tack Free Time | | ASTM C-679 |
49 | Effect of Heat Aging | Oven | ASTM C-792 |
50 | Material Verification Test | FTIR | ASTM C-1252 |
51 | Aging of Polymers | Oven, UTM | |
52 | Surface Area | BET | |
53 | pH test | pH Tester | |
54 | Extrusion Rate | | ASTM C-1183 |
55 | Application Life | | ASTM C-1183 |
56 | The Department has capability to design and perform other tests for plastics, rubbers, paints, and adhesives as per standards. | | |
| | | |